Hey Crafty People!
After taking Altenew’s Beyond Basic Backgrounds class taught by the wonderful Lydia Evans. I felt inspired to create using various techniques within the same design; so today we’ll be touching upon some ombre stamping, inlaid die cutting & heat embossing.
So let’s get to it!
Ombre Stamping A Border Stamp
I decided to use this beautiful border stamp from the Envelope Art set; I placed a panel of Neenah 80lb (4 x 5 1/4in) in my MISTI stamping platform and I lined the straight edge of the stamp up with a pencil line I drew onto the panel to help me position things properly.
Once I was happy with the placement of the stamp I picked it up on the lid of my MISTI and I started to ink it up with the darker of the inks I had chosen making sure that I kept the ink onto the bottom half of the stamp going all the way across the width of it. I own mainly the mini ink pads because of limited storage and these are great for this technique; the smaller size allows for more precise ink placement.
TIP: When you are aiming for an ombre effect it’s really important that you use a lint free cloth to dab at the edge of the area you’ve inked. This removes any harsh edges where the ink finishes which is pivotal to a soft blended look.
Once I had stamped the darker colour I added the lighter one to the upper portion of the stamp; you need to make sure that the two colours overlap and again use your lint free cloth to soften the harsh edges of ink. These steps can be repeated if needed. Once I was happy with this side I flipped my panel round and stamped the same that side.
Inlaid Die Cutting
I used one the Hello die from Bold Greetings set to cut this from the centre of my panel, spacing it evenly between the two stamped borders; it’s really important that this doesn’t slip whilst I run it through my Die Cutter so I secured it in place with some low tac tape.
Whenever I am crafting I save the offcuts of any card stock I use; this can be an expensive hobby and I want to ensure that I get the most out of all of my supplies. I use the smallest pieces to test Copic colour combinations, and larger pieces are perfect for die cutting. I ink blended the same colours I had stamped with onto one of these pieces and then cut the same Hello die from that.
When we talk about ‘inlaid’ die cutting what we mean is removing a die cut from one piece of card stock and adding in the same shape cut from another piece, so that the two pieces sit level with each other, no added dimensions.
TIP: If there are any little pieces, e.g the middle of an ‘o’ then it is vital that you keep these pieces panel A, these need to be inserted into the middle of C in order to get a successful inlaid result.
I find the easiest way to put A & C together is by gluing a piece of thin scrap paper onto the back of panel A, which then allows you to glue C straight onto this paper.
Once I had allowed the glue to dry I took a Versamark ink pad and wiped it across the edges of the panel. Versamark is just a really sticky ink that is takes some time to dry, which makes it perfect for embossing because the embossing powder will stick to anywhere the ink is and stay there long enough to heat it.
I added some glitter embossing powder by WOW! Once I had checked that I was happy with where the embossing would be I heated it up to set it in place. Make sure to heat glitter powder from behind first because if heated from above the heat tool is likely to be blown off before it heats enough to melt.
TIP: Make sure you pre-heat your heat gun so that it is really hot, this will melt the powder quickly and reduce risk of your card stock warping.
I popped the finished panel up on adhesive foam tape onto an A2 card base made from Neenah 110lb. To embellish I added some Nuvo Crystal Drops in white, once these are fully dry I used some matching Copic markers to colour the dots in. This is a great way of always having matching enamel-style dots for every project!
I really enjoyed creating this mixed media/mixed technique design and I think that by taking several different techniques and using them together you can really elevate your designs & make some incredibly impressive cards! If you give it a go then please tag me in, I absolutely love to see what you are all making. If you have any questions about any of the techniques I’ve talked about today then please do give me a shout, I would be more than happy to help! Stay crafty!
Thank you so much for stopping by today, if you’re new here then I hope that you will consider subscribing.
Find me on these platforms:
*Affiliate links are used, where available; this means that I may get a small commission if you purchase using one of these links, at no extra cost at all to yourself. A huge thank you goes to anyone who does purchase using my links, it is so highly appreciated. ❤
- Altenew Envelope Art UK US
- Altenew Bold Greetings UK US
- Altenew Crisp Dye Ink – Emerald, Volcano Lake (Sea Shore mini ink cube set) UK US
- Versamark ink pad
- WOW! Mermaid Tail Embossing Powder UK US
- WOW! Dual Speed Heat Tool UK US
- Nuvo Crystal Drops – White UK US
- Neenah Classic Crest – Solar White 80lb*
- Neenah Classic Crest Solar White – 110lb (*Use code natashapapertree for 10% off)
- MISTI stamp platform
- Gemini Jr die cutting machine UK
- Silhouette Cameo 4 UK
- Nuvo Deluxe Adhesive UK US
- Arteza – Foam Adhesive tape